Data, Research & Analytics
Category: General
Posted by: admin

ISO 9001:2000 Quality management systems — Requirements include a document of approximately 30 pages which is available at the national standards organization in each country. Outline contents are as follows:
1. Appliances Burning Gaseous Fuels (AppliGas)
2. Cableway Installations to Carry Persons
3. Low Voltage Electrical Equipment.
4. Construction Products
5. Equipment and Protective Systems for Used in Potentially Explosive Atmospheres (Atex)
6. Explosives for Civil Uses
7. Hot Water Boilers
8. Lift
9. Machinery
10. Measuring Instruments
11. Medical Devices
12. Active Implantable Medical Devices
13. In Vitro Diagnostic Medical Devices
14. Non-automatic Weighing Instruments
15. Radio Equipment & Telecommunications Terminal Equipment (R & TTE)
16. Personal Protective Equipment (PPE)
17. Simple Pressure Vessels
18. Pressure Equipment
19. Recreational Craft
20. Toys


Here at Accredium certification., we offer a full range of Self Certification for CE Mark compliance and CE management services, for any industry, across the globe. Expert CE Mark Advisers can guide you through the CE compliance maze, assisting you to correctly CE Label your Machinery. Give us a call to see how we can help you.
Category: General
Posted by: admin

Accredium Certification Body offering a complete solution of CE Marking,ISO Certifications, welder qualification & Testing services including Technical Guidance, Documentation, Testing, Pre Audit & Audits and Certification.

Accredium Conformity Assessment Services Private Limited
Plot- 9-10, 4th Floor, Main Najafgarh Road,
Adjacent to Pizza Hut/State Bank of Patiala,
Metro Pillar No-769, Near Dwraka Mor
Metro Station, New Delhi-110059
(L):011-65888706,
(M):+91-97162-31789,+91-97160-41789
Email : info@acascert.com
Category: General
Posted by: admin

Expansion into global markets like Europe represents a profitable future for medical device manufacturers, but this transition also requires an in-depth understanding of complicated regulatory demands and unique market challenges. With the goal of bringing your product to market in the most efficient manner possible, we can help you overcome every hurdle along the way.

Accredium Conformity Assessment Services Private Limited
Plot- 9-10, 4th Floor, Main Najafgarh Road,
Adjacent to Pizza Hut/State Bank of Patiala,
Metro Pillar No-769, Near Dwraka Mor
Metro Station, New Delhi-110059
(L):011-65888706,
(M):+91-97162-31789,+91-97160-41789
Email : info@acascert.com
Category: General
Posted by: admin

CE marking is the manufacturer's declaration that the medical device meets the appropriate regulatory requirements. To understand which requirements you need to meet, you must classify the device and identify the appropriate conformity assessment route for your product. This dictates the required activities to demonstrate conformity. We will review the route you chose to confirm its suitability, and work with you to execute the most efficient review process for the route selected. Our trusted review processess allow you to build reliability and confidence into your CE marking project planning.

Accredium Conformity Assessment Services Private Limited
Plot- 9-10, 4th Floor, Main Najafgarh Road,
Adjacent to Pizza Hut/State Bank of Patiala,
Metro Pillar No-769, Near Dwraka Mor
Metro Station, New Delhi-110059
(L):011-65888706,
(M):+91-97162-31789,+91-97160-41789
Email : info@acascert.com
Category: General
Posted by: admin


• Indicates to governments that the product can be legally sold within the European Union (EU) and the European Free Trade Area (EFTA)
• Ensures the product can move freely throughout the European Single Market
• Indicates to customers that the product meets designated minimum safety standards and therefore a minimum level of quality
• Promotes public health and safety
• Enhances product credibility
• Leads to improved sales and greater customer satisfaction.

Accredium Conformity Assessment Services Private Limited
Plot- 9-10, 4th Floor, Main Najafgarh Road,
Adjacent to Pizza Hut/State Bank of Patiala,
Metro Pillar No-769, Near Dwraka Mor
Metro Station, New Delhi-110059
(L):011-65888706,
(M):+91-97162-31789,+91-97160-41789
Email : info@acascert.com
Category: General
Posted by: admin

CE marking stands for Conformity to Europeon. There are various Directives and standards been formed by the Europeon Union on various products which focuses upon Safety. Products to be CE marked shall be evaluated against those Directives and standards. It may include verification or testing as per Directive or standard requirements.

Once the testing and verification is completed, a Technical constructil file TCF is compiled with declaration of confirmity against applied directives and standards.

CE marking can be applied to various products including mechanical, electrical, electronics, medical etc.

If you are interested,then contact us at this address.

Accredium Conformity Assessment Services Private Limited
Plot- 9-10, 4th Floor, Main Najafgarh Road,
Adjacent to Pizza Hut/State Bank of Patiala,
Metro Pillar No-769, Near Dwraka Mor
Metro Station, New Delhi-110059
(L):011-65888706,
(M):+91-97162-31789,+91-97160-41789
Email : info@acascert.com
Category: General
Posted by: admin

CE Marking Self Certification Notified Body Certification Agency
Accredium certification is a leading service provider for CE marking certification in Ahmedabad, Gujarat, India
Located in Gujarat in India,Accredium certification is helping customers in achieving CE marking product certification. As applicable in product we can consult for CE marking in self certification or CE marking with notified body-agency in India.

Accredium Conformity Assessment Services Private Limited
Plot- 9-10, 4th Floor, Main Najafgarh Road,
Adjacent to Pizza Hut/State Bank of Patiala,
Metro Pillar No-769, Near Dwraka Mor
Metro Station, New Delhi-110059
(L):011-65888706,
(M):+91-97162-31789,+91-97160-41789
Email : info@acascert.com

Category: General
Posted by: admin


Accredium certification provide, CE marking training providers in India. We are providing CE marking consultancy services in India at Gujarat( ahmedabad, vadodara-baroda, surat, ankleshwar, bharuch, nadiad, anand, vidhyanagar, mehsana, kadi, kalol, chhatral, palanpur, rajkot, bhavnagar, Jamnagar, himmatnagar, bavla, gandhinagar, gandhidham, kutch, mundra, surendranagar, junagadh, saurashtra and in other cities of Gujarat ) , Rajasthan,madhya pradesh , uttar pradesh, hariyana, punjab, bihar, maharashtra, kerala, tamilnadu, andhra pradesh, and in other states of India


Accredium Conformity Assessment Services Private Limited
Plot- 9-10, 4th Floor, Main Najafgarh Road,
Adjacent to Pizza Hut/State Bank of Patiala,
Metro Pillar No-769, Near Dwraka Mor
Metro Station, New Delhi-110059
(L):011-65888706,
(M):+91-97162-31789,+91-97160-41789
Email : info@acascert.com

Category: General
Posted by: admin

The CE mark is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European Directives. The letters 'CE' are an abbreviation, French word for European conformity. The CE mark must be affixed to a product if it falls under the scope of 'New Approach' Directives of European union.

Without the CE marking, and thus without complying with the provisions of the Directives, the product may not be placed in the market or put into service in the fifteen member states of the European Union and Norway, Iceland and Liechtenstein. However, if the product meets the provisions of the applicable European Directives, and the CE mark is affixed to a product, these countries may not prohibit, restrict or impede the placing in the market or putting into service of the product.

The CE Mark is compulsory within the context of the application of EC New Approach Directives.Thus, CE marking can, be regarded as the product’s ‘trade passport’ for Europe.

Notified bodies are recognized organizations within Member States, which can certify conformity assessment on the basis of the New Approach Directives.

Accredium Conformity Assessment Services Private Limited
Plot- 9-10, 4th Floor, Main Najafgarh Road,
Adjacent to Pizza Hut/State Bank of Patiala,
Metro Pillar No-769, Near Dwraka Mor
Metro Station, New Delhi-110059
(L):011-65888706,
(M):+91-97162-31789,+91-97160-41789
Email : info@acascert.com
Category: General
Posted by: admin

The CE logo is placed on the conforming products along with the ISO standard number to which the product is in compliance. The minimum height of the logo must be 5 mm. If the size is enlarged then the letters must be in right proportion.

Accredium Conformity Assessment Services Private Limited
Plot- 9-10, 4th Floor, Main Najafgarh Road,
Adjacent to Pizza Hut/State Bank of Patiala,
Metro Pillar No-769, Near Dwraka Mor
Metro Station, New Delhi-110059
(L):011-65888706,
(M):+91-97162-31789,+91-97160-41789
Email : info@acascert.com